Turbine Aerothermodynamics Laboratory - Publications
Publications
2023
Journal Publications
- Whitaker, S.M. and Bons, J.P., 2023, “An Improved Particle Impact Model by Accounting for Rate of Strain and Stochastic Rebound,” ASME Journal of Turbomachinery, Jan 2023, Vol 145, 011010 (11 pages).
Conference Papers
- Wendel, N., Mizer, A., Subasic, N., and Bons, J.P., 2023, “Mineral Composition Effects On Dust Deposition At Realistic Engine Conditions”, submitted for presentation at IGTI 2023 in Boston, Massachusetts, Jun 26-30, 2023. Paper #: GT2023-101559.
- Wendel, N., Mizer, A., Subasic, N., and Bons, J.P., 2023, “Synthesizing Arizona Road Dust for Research in Gas Turbine Engine Deposition”, presented at AIAA SciTech 2023 in National Harbor, Maryland, Jan 23-27, 2023. Paper #: AIAA 2023-0885
DOI: 10.2514/6.2023-0885 - Lo, C. and Bons, J.P., 2023, “Smoothing Techniques to Improve Flow Solution Convergence for Modeling Surface Deposition in Two-Phase Flows”, presented at AIAA SciTech 2023 in National Harbor, Maryland, Jan 23-27, 2023. Paper #: AIAA 2023-1642
DOI: 10.2514/6.2023-1642
2022
Journal Publications
- Bons, J.P., Lo, C., Nied, E., and Han, J., 2022, “The Effect Of Flow and Surface Temperature On Cold-Side and Hot-Side Turbine Deposition”, ASME Journal of Turbomachinery, Dec 2022, Vol. 144, 121013 (12 pages)
DOI: 10.1115/GT2022-82027 - Bowen, C., and Bons, J.P., 2022, “Enhancing Turbine Deposition Prediction Capability with Conjugate Mesh Morphing”, ASME Journal of Turbomachinery, June 2022, Vol. 144(6), 061013 (11 pages).
DOI: 10.1115/1.4054282 - Lo, C., Bons, J.P., Yao, Y., and Capecelatro, J., 2022, “Assessment of stochastic models for predicting particle transport and deposition in turbulent pipe flows”. Journal of Aerosol Science, 162, 105954.
DOI: 10.1016/j.jaerosci.2022.105954
Conference Papers
- Bons, J.P., Lo, C., Nied, E., and Han, J., 2022, “The Effect Of Flow and Surface Temperature On Cold-Side and Hot-Side Turbine Deposition” accepted for presentation at the 2022 IGTI Conference in Rotterdam, The Netherlands. (GT2022-82027)
DOI: 10.1115/GT2022-82027 - Nied, E., Bons, J.P., and Lundgreen, R., 2022, “Unpacking Inter-Mineral Synergies And Reactions During The Deposition Of AFRL Dust At Temperatures Relevant To Gas Turbine Engines”, accepted for presentation at the 2022 IGTI Conference in Rotterdam, The Netherlands (GT2022-82304).
DOI: 10.1115/GT2022-82304
2021
Journal Publications
- Clark, R.A., Plewacki, N., Gnanaselvam, P., and Bons, J.P., 2021, “The Effect Of Surface Temperature On Deposition With Thermal Barrier Coatings,” ASME Journal of Turbomachinery, April 2021, 143(4), 041004-11 pages
DOI: 10.1115/1.4049856 - Varney, B., Barker, B., Bons. J.P., Wolff, T., and Gnanaselvam, P., 2021, “FINE PARTICULATE DEPOSITION IN AN EFFUSION PLATE GEOMETRY,” ASME Journal of Turbomach., Jan 2021, 143(1):011001.
DOI: 10.1115/1.4048293
Conference Papers
- Bowen, C., and Bons, J.P., 2021, “Enhancing Turbine Deposition Prediction Capability with Conjugate Mesh Morphing”, presented (virtually) at the IGTI 2021 (GT2021-60224).
DOI: 10.1115/GT2021-60224 - Gnanaselvam, P., Lo, C.H., Han, J., and Bons, J.P., 2021, “Turbulent Dispersion and Deposition of Micron-Sized Particles in a Turbulent Pipe Flow at High Temperatures”, presented at the AIAA SciTech 2021 (virtual), January 2021. Paper #: AIAA-2021-0850.
DOI: 10.2514/6.2021-0850
2020
Journal Publications
- Bowen, C., Ameri, A., and Bons, J.P., 2020, “Challenges Associated with Replicating Rotor Blade Deposition in a Non-Rotating Annular Cascade,” ASME Journal of Turbomach., Sep 2020.
DOI: 10.1115/1.4047399 - Libertowski, N.D., Geiger, G.M., and Bons, J.P., 2020, “Modeling Deposit Erosion In Internal Turbine Cooling Geometries,” ASME J. Eng. Gas Turbines Power, Mar 2020, 142(3): 031024 (9 pages).
DOI: 10.1115/1.4045954
Conference Papers
- Clark, R.A., Plewacki, N., Gnanaselvam, P., and Bons, J.P., 2020, “The Effect Of Surface Temperature On Deposition With Thermal Barrier Coatings,” presented (virtually) at the IGTI 2020 in London, England (GT2020-15544)
DOI: 10.1115/GT2020-15544 - Bowen, C.P., and Bons, J.P., 2020, “An Experimental and Computational Investigation of Absolute Pressure Effects on Deposition in an Effusion Cooling Geometry,” presented (virtually) at the IGTI 2020 (GT2020-15632)
DOI: 10.1115/GT2020-15632 - Geiger, G., Gnanaselvam, P., Plewacki, N., Libertowski, N., and Bons, J.P., 2020, “Limitations with using RANS to Predict Airborne Particle Distribution and Scalar Mixing in a Turbulent Pipe Flow,” presented at AIAA SciTech 2020 in Orlando, FL, January 6-10, 2020. Paper #: AIAA-2020-1330.
DOI: 10.2514/6.2020-1330 - Plewacki, N., Gnanaselvam, P., and Bons, J.P., 2020, “The Effect of Elevated Temperatures on Airborne Particle Deposition and Rebounds,” presented at AIAA SciTech 2020 in Orlando, FL, January 6-10, 2020. Paper #: AIAA-2020-1576.
DOI: 10.2514/6.2020-1576 - Potts, I.A., and Bons, J.P., 2020, “Ingested Particle Redistribution in a Serpentine Engine Inlet,” presented at AIAA SciTech 2020 in Orlando, FL, January 6-10, 2020. Paper #: AIAA-2020-1615.
DOI: 10.2514/6.2020-1615
2019
Journal Publications
- Bowen, C.P., Libertowski, N.D., Mortazavi, M., and Bons, J.P., 2019, “Modeling Deposition in Turbine Cooling Passages with Temperature Dependent Adhesion and Mesh Morphing,” Journal of Engineering for Gas Turbines and Power, July 2019, 141(7), 071010-12 pages, doi: 10.1115/1.4042287.
Conference Publications
- Bowen, C., Ameri, A., and Bons, J.P., 2019, “Challenges Associated with Replicating Rotor Blade Deposition in a Non-Rotating Annular Cascade,” presented at the IGTI 2019 in Phoenix, AZ, June 2019 (GT2019-91910).
- Libertowski, N.D., Geiger, G.M., and Bons, J.P., 2019, “MODELING DEPOSIT EROSION IN INTERNAL TURBINE COOLING GEOMETRIES,” presented at the IGTI 2019 in Phoenix, AZ, June 2019 (GT2019-91785).
- Crowe, E.D. and Bons, J.P., 2019, “Effects of Dust Composition on Particle Deposition in an Effusion Cooling Geometry,” presented at the IGTI 2019 in Phoenix, AZ, 17-21 June 2019 (GT2019-91032).
- Varney, B., Barker, B., Bons. J.P., Wolff, T., and Gnanaselvam, P., 2019, “FINE PARTICULATE DEPOSITION IN AN EFFUSION PLATE GEOMETRY,” presented at the IGTI 2019 in Phoenix, AZ, 17-21 June 2019 (GT2019-91740).
- Libertowski, N.D., Plewacki, N.A., and Bons, J.P., 2019, “The Effect of Temperature and Melting Relative to Particle Deposition in Gas Turbines,” presented at AIAA SciTech 2019 in San Diego, CA, Jan 7-11, 2019. Paper #: AIAA-2019-1951.
2018
Journal Publications
- Sacco, C., Bowen, C., Lundgreen, R., Bons, J.P., Ruggiero, E., Allen, J., and Bailey, J., 2018, “Dynamic Similarity in Turbine Deposition Testing and the Role of Pressure,” J.Eng.Gas Turbines Power, Oct 2018, 140(10), 102605-12 pages, doi: 10.1115/1.4038550.
Conference Papers
- Bowen, C.P., Libertowski, N.D., Mortazavi, M., and Bons, J.P., 2018, “Modeling Deposition in Turbine Cooling Passages with Temperature Dependent Adhesion and Mesh Morphing,” presented at the IGTI 2018 conference in Oslo, Norway. (GT2018-76251)
- Whitaker, S.M. and Bons, J.P., 2018, “An Improved Particle Impact Model by Accounting for Rate of Strain and Stochastic Rebound,” presented at the IGTI 2018 conference in Oslo, Norway. (GT2018-77158)
- Wolff, T., Bowen, C., and Bons, J.P., 2018, “The Effect of Particle Size on Deposition in an Effusion Cooling Geometry,” presented at AIAA SciTech 2018 in Kissimmee, FL, Jan 8-12, 2018. Paper #: AIAA-2018-0391.
- Blunt, R., Whitaker, S.M., and Bons, J.P., 2016, “The Effects of Turning Angle on Particle Deposition in Turbine Cooling Holes”, presented at the AIAA Aviation Tech Conference, June13-17, 2016, in Washington D.C., paper #AIAA-2016-4106.
2017
Journal Publications
- Prenter, R., Ameri, A., and Bons, J.P., 2017, “Computational Simulation Of Deposition In A Cooled High-Pressure Turbine Stage With Hot Streaks”, J. Turbomach., 2017, Vol 139(9): 091005-091005-11, doi: 10.1115/1.4036008.
- Bons, J.P., Prenter, R., and Whitaker, S., 2017, “A Simple Physics-Based Model For Particle Rebound And Deposition In Turbomachinery”, J. Turbomach., 2017, Vol. 139(8):081009-081009-12, doi: 10.1115/1.4035921
- Prenter, R., Ameri, A., and Bons, J.P., 2016, “Deposition on a Cooled Nozzle Guide Vane with Non-uniform Inlet Temperatures”, ASME J. Turbomach 138(10), 101005 (11 pages), doi: 10.1115/1.4032924.
Conference Papers
- Sacco, C., Bowen, C., Lundgreen, R., Bons, J.P., Ruggiero, E., Allen, J., and Bailey, J., 2017, “Dynamic Similarity in Turbine Deposition Testing and the Role of Pressure,” presented at the ASME Turbo Expo 2017 in Charlotte, SC, June 26-30, 2017, (GT2017-64961).
- Whitaker, S.M., Lundgreen, R.K., and Bons, J.P., 2017, “Effects of Metal Surface Temperature on Deposition-Induced Flow Blockage in a Vane Leading Edge Cooling Geometry,” presented at the ASME Turbo Expo 2017 in Charlotte, SC, June 26-30, 2017, (GT2017-64946).
- Whitaker, S.W., Peterson, B., Miller, A.F., and Bons, J.P., 2016, “THE EFFECT OF PARTICLE LOADING, SIZE, AND TEMPERATURE ON DEPOSITION IN A VANE LEADING EDGE IMPINGEMENT COOLING GEOMETRY”, presented at the ASME Turbo Expo 2016 in Seoul, South Korea, June 13-17, 2016. Paper #GT2016-57413.
2016
Conference Papers
- Prenter, R., Ameri, A., and Bons, J.P., 2016, “COMPUTATIONAL SIMULATION OF DEPOSITION IN A COOLED HIGH-PRESSURE TURBINE STAGE WITH HOT STREAKS”, presented at the ASME Turbo Expo 2016 in Seoul, South Korea, June 13-17, 2016. Paper #GT2016-57815.
- Lundgreen, R.K., Sacco, C., Prenter, R., and Bons, J.P., 2016, “TEMPERATURE EFFECTS ON NOZZLE GUIDE VANE DEPOSITION IN A NEW TURBINE CASCADE RIG, presented at the ASME Turbo Expo 2016 in Seoul, South Korea, June 13-17, 2016. Paper #GT2016-57560.
- Bons, J.P., Prenter, R., and Whitaker, S., 2016, “A SIMPLE PHYSICS-BASED MODEL FOR PARTICLE REBOUND AND DEPOSITION IN TURBOMACHINERY”, presented at the ASME Turbo Expo 2016 in Seoul, South Korea, June 13-17, 2016. Paper #GT2016-56697.
2015
Journal Publications
- Whitaker, S.M., Prenter, R., and Bons, J.P., 2015, “The Effect of Freestream Turbulence on Deposition for Nozzle Guide Vanes”, ASME Journal of Turbomachinery, Dec 2015, Vol. 137(12): 121001, 9 pages.
Conference Papers
- Bons, J.P., Blunt, R., and Whitaker, S., 2015, “A Comparison of Techniques for Particle Rebound Measurement in Gas Turbine Applications”, presented at the ASME Turbo Expo 2015 in Montreal Canada, June 15-19, 2015. Paper #GT2015-43766.
- Whitaker, S.M. and Bons, J.P., 2015, “Evaluation of Elastic-Plastic Rebound Properties of Coal Fly Ash Particles for use in a Universal Turbine Deposition Model”, presented at the ASME Turbo Expo 2015 in Montreal Canada, June 15-19, 2015. Paper #GT2015-43765.
- Zagnoli, D., Prenter, R., Ameri, A., and Bons, J.P., 2015, “Numerical Study of Deposition in a Full Turbine Stage Using Steady and Unsteady Methods”, presented at the ASME Turbo Expo 2015 in Montreal Canada, June 15-19, 2015. Paper #GT2015-43613.
- Prenter, R., Ameri, A., and Bons, J.P., 2015, “Deposition on a Cooled Nozzle Guide Vane with Non-uniform Inlet Temperatures”, presented at the ASME Turbo Expo 2015 in Montreal Canada, June 15-19, 2015. Paper #GT2015-43583.
- Zagnoli, D., Prenter, R., Ameri, A., and Bons, J.P., 2015, “Experimental and Numerical Study of Deposition in Pin Fin Arrays with Impingement Cooling Arrays,” presented at the 2015 AIAA SciTech conference in Kissimmee, FL, January 5-9, 2015. Paper #AIAA-2015-0349.
2014
Journal Publications
- Casaday, B., Prenter, R., Bonilla, C., Lawrence, M., Clum, C., Ameri, A., Bons, J.P., 2014, “Deposition with Hot Streaks in an Uncooled Turbine Vane Passage,” ASME Journal of Turbomachinery, April 2014, Vol. 136., 041017 (9 pages). doi: 10.1115/1.4025215.
Conference Papers
- Whitaker, S.M., Prenter, R., and Bons, J.P., 2014, “The Effect of Freestream Turbulence on Deposition for Nozzle Guide Vanes”, presented at the ASME Turbo Expo 2014 in Dusseldorf, Germany, June 16-20, 2014. Paper #GT2014-27168.
- Clum, C., Bokar, E., Casaday, B., and Bons, J.P., 2014, “Particle Deposition in Internal Cooling Cavities of a Nozzle Guide Vane- Part I: Experimental Investigation”, presented at the ASME Turbo Expo 2014 in Dusseldorf, Germany, June 16-20, 2014. Paper #GT2014-27150.
- Casaday, B., Clum, C., and Bons, J.P., 2014, “Particle Deposition in Internal Cooling Cavities of a Nozzle Guide Vane- Part II: Analytical and Computational Modeling”, presented at the ASME Turbo Expo 2014 in Dusseldorf, Germany, June 16-20, 2014. Paper #GT2014-27155.
- Prenter, R., Whitaker, S.M., and Bons, J.P., 2014, “The Effects of Slot Film Cooling on Deposition on a Nozzle Guide Vane”, presented at the ASME Turbo Expo 2014 in Dusseldorf, Germany, June 16-20, 2014. Paper #GT2014-27171.
- Whitaker, S.M., Sacco, C., and Bons, J.P., 2014, “Evaluation of Coefficients of Restitution Using High Speed Particle Shadow Velocimetry with Application to Particle Separators for Gas Turbine Engines,” presented at 2014 AIAA SciTech ASM conference in National Harbor, Maryland, January 13-17, 2014. Paper #AIAA 2014-1155.
- Lawrence, M.J., Whitaker, S.M., Bons, J.P., Villalpando, M.R., Garcia, T-P., and Lara-Curzio, E., 2014 “Evaluation of Ash Particle Rebounds in a Simulated Gas Turbine Environment,” presented at 2014 AIAA SciTech ASM conference in National Harbor, Maryland, January 13-17, 2014. Paper #AIAA 2014-1156.
2013
Journal Publications
- Casaday, B.P., Ameri, A., Bons, J.P., 2013, “Numerical Investigation of Ash Deposition on Nozzle Guide Vane Endwalls,” ASME Journal of Engineering for Gas Turbines and Power, March 2013, Vol. 135., 032001 (9 pages). doi: 10.1115/1.4007736.
- Webb, J., Casaday, B., Barker, B., Bons, J.P., Gledhill, A.D., and Padture, N.P., 2013, “Coal Ash Deposition on Nozzle Guide Vanes: Part I – Experimental Characteristics of Four Coal Ash Types,” ASME Journal of Turbomachinery, Vol. 135, March 2013, 021033, (9 pages).
- Barker, B., Casaday, B., Shankara, P., Ameri, A., Bons, J.P., 2013, “Coal Ash Deposition on Nozzle Guide Vanes: Part II – Computational Modeling,” ASME Journal of Turbomachinery, Vol. 135, January 2013, 011015, (9 pages).
Conference Papers
- Casaday, B., Prenter, R., Bonilla, C., Lawrence, M., Clum, C., Ameri, A., Bons, J.P., 2013, “Deposition with Hot Streaks in an Uncooled Turbine Vane Passage,” presented at the ASME Turbo Expo 2013 in San Antonio, Texas, June 3-7, 2013. Paper #GT2013-95108.
- Bonilla, C., Clum, C., Lawrence, M., Casaday, B., Bons, J.P., 2013, “The Effect of Film Cooling on Nozzle Guide Vane Deposition,” presented at the ASME Turbo Expo 2013 in San Antonio, Texas, June 3-7, 2013. Paper #GT2013-95081.
- Whitaker, S., Reilly, D., and Bons, J.P., 2013, “A Survey of Airborne Particle Impact Characteristics Using High Speed Particle Shadow Velocimetry” presented at 2013 AIAA FD conference in San Diego, CA. Paper #AIAA 2013-2484.
- Lawrence, M.J., Whitaker, S.M., Casaday, B.P., Lageman, D., and Bons, J.P., 2013, “Computational Modeling of High Temperature Deposition in Gas Turbine Engines with Experimental Validation,” presented at AIAA Aerospace Sciences Meeting in Grapevine, TX, Jan 7-10, 2013. Paper #AIAA-2013-1112
2021
Journal Publications
- Hossain, M.A., Ameri, A., Gregory, J.W., and Bons, J.P., 2021, “Experimental Investigation Of Innovative Cooling Schemes On An Additively Manufactured Engine Scale Turbine Nozzle Guide Vane,” ASME Journal of Turbomach., Jan 2021.
DOI: 10.1115/1.4049618 / researchgate.net - Hossain, M.A, Ameri, A., and Bons, J.P., 2021, “Conjugate Heat Transfer Study of Innovative Pin-Fin Cooling Configuration,” AIAA Journal of Propulsion and Power, Feb 2021.
DOI: 10.2514/1.B37980 / researchgate.net - Hossain, M.A., Ameri, A., Gregory, J.W., and Bons, J.P., 2021, “Effects of Fluidic Oscillator Exit Fan Angle on Flow Field and Impingement Heat Transfer”, AIAA Journal, April 2021.
DOI: 10.2514/1.J059931 / researchgate.net
Conference Papers
- Spens, A., and Bons, J.P., 2021, “Experimental Investigation of Synchronized Sweeping Jets for Film Cooling Applications”, presented at the AIAA SciTech 2021 (virtual), January 2021. Paper #: AIAA-2021-2003.
DOI: 10.2514/6.2021-2003 / researchgate.net
2020
Journal Publications
- Hossain, M.A., Ameri, A., Gregory, J.W., and Bons, J.P., 2020, “Sweeping Jet Film Cooling at High Blowing Ratio on a Turbine Vane,” ASME. J. Turbomach. December 2020; 142: 121010 (12 pages).
DOI: 10.1115/1.4047396 / researchgate.net - Hossain, M. A., Asar, M. E., Gregory, J. W., and Bons, J. P. (March 17, 2020). "Experimental Investigation of Sweeping Jet Film Cooling in a Transonic Turbine Cascade." ASME. J. Turbomach. April 2020; 142(4): 041009.
DOI: 10.1115/GT2019-91678 / researchgate.net
Conference Papers
- Hossain, M.A., Ameri, A., Gregory, J.W., and Bons, J.P., 2020, “Experimental Investigation Of Innovative Cooling Schemes On An Additively Manufactured Engine Scale Turbine Nozzle Guide Vane,” presented (virtually) at the IGTI 2020 in London, England (GT2020-15707)
DOI: 10.1115/GT2020-15707 / researchgate.net - Hossain, M.A, Ameri, A., and Bons, J.P., 2020, “Conjugate Heat Transfer Study of Innovative Pin-Fin Cooling Configuration,” presented at AIAA SciTech 2020 in Orlando, FL, January 6-10, 2020. Paper #: AIAA-2020-0634.
DOI: 10.2514/6.2020-0634 / researchgate.net
2019
Journal Publications
- Hossain, M.A., Agricola, L., Ameri, A., Gregory, J.W., and Bons, J.P., 2019, “Sweeping Jet Film Cooling on a Turbine Vane,” Journal of Turbomachinery, March 2019, Vol. 141, 031007-1-11.
Conference Papers
- Hossain, M.A., Asar, M.E., Ameri, A., Gregory, J.W., and Bons, J.P., 2019, “EXPERIMENTAL INVESTIGATION OF SWEEPING JET FILM COOLING IN A TRANSONIC TURBINE CASCADE,” presented at the IGTI 2019 in Phoenix, AZ, June 2019 (GT2019-91678).
- Hossain, M.A., Ameri, A., Gregory, J.W., and Bons, J.P., 2019, “SWEEPING JET FILM COOLING AT HIGH BLOWING RATIO ON A TURBINE VANE,” presented at the IGTI 2019 in Phoenix, AZ, June 2019 (GT2019-91696).
- Hossain, M.A., Ameri, A.A., Gregory, J.W., and Bons, J.P., 2019, “Effects of Rotation on a Fluidic Actuator,” presented at AIAA SciTech 2019 in San Diego, CA, Jan 7-11, 2019. Paper #: AIAA-2019-0885.
2018
Journal Publications
- Hossain, M.A., Agricola, L., Ameri, A., Gregory, J.W., Bons, J.P., 2018, “Sweeping Jet Impingement Heat Transfer On A Simulated Turbine Vane Leading Edge”, Journal of Global Power and Propulsion Society (GPPS), 2018, 2:402-414.
- Hossain, M.A., Prenter, R., Lundgreen, R., Ameri, A., Gregory, J.W., Bons, J.P., 2018, "Experimental and numerical investigation of sweeping jet film cooling," ASME Journal of Turbomachinery, March 2018, 140(3), p. 031009
Conference Papers
- Agricola, L., Hossain, M.A., Ameri, A., Gregory, J.W., and Bons, J.P., 2018, “Turbine Vane Leading Edge Impingement Cooling with a Sweeping Jet,” presented at the IGTI 2018 conference in Oslo, Norway. (GT2018-77073)
- Hossain, M.A., Agricola, L., Ameri, A., Gregory, J.W., and Bons, J.P., 2018, “Sweeping Jet Film Cooling on a Turbine Vane,” presented at the IGTI 2018 conference in Oslo, Norway. (GT2018-77099)
- Hossain, M.A., Agricola, L., Ameri, A., Gregory, J.W., Bons, J.P., 2018, “SWEEPING JET IMPINGEMENT HEAT TRANSFER ON A SIMULATED TURBINE VANE LEADING EDGE”, presented at Global Power and Propulsion Society (GPPS) Forum 18, in Montreal, Quebec, Canada, 7-9 May 2018. (GPPS-2018-0148)
- Hossain, M.A., Prenter, R., Lundgreen, R.K., Ameri, A., Gregory, J.W., and Bons, J.P., 2017, “Experimental and Numerical Investigation of Sweeping Jet Film Cooling,” presented at the ASME Turbo Expo 2017 in Charlotte, SC, June 26-30, 2017, (GT2017-64479).
- Asar, M.E., Agricola, L.M., Hossain, M.A., and Bons, J.P., 2018, “An Innovative Pin Fin Design for Turbine Trailing Edge Cooling”, presented at the July 2018 AIAA Propulsion and Energy Forum, Cincinnati, OH. Paper #: AIAA-2018-4524.
- Hossain, M.A., Agricola, L.M., Ameri, A., Gregory, J.W., and Bons, J.P., 2018, “Effects of Exit Fan Angle on the Heat Transfer Performance of Sweeping Jet Impingement”, presented at the July 2018 AIAA Propulsion and Energy Forum, Cincinnati, OH. Paper #: AIAA-2018-4886.
- Hossain, M.A., Agricola, L., Ameri, A., Gregory, J.W., and Bons, J.P., 2018, “Effects of Curvature on the Performance of Sweeping Jet Impingement Heat Transfer,” presented at AIAA SciTech 2018 in Kissimmee, FL, Jan 8-12, 2018. Paper #: AIAA-2018-0243.
2017
Conference Papers
- Prenter, R., Hossain, M.A., Agricola, L., Ameri, A., and Bons, J.P., 2017, “Experimental and Numerical Characterization of Reverse-Oriented Film Cooling,” presented at the ASME Turbo Expo 2017 in Charlotte, SC, June 26-30, 2017, (GT2017-64731).
- Agricola, L., Hossain, M.A., Prenter, R., Lundgreen, R.K., Ameri, A., Gregory, J.W., and Bons, J.P., 2017, “Impinging Sweeping Jet Heat Transfer,” presented at the 2017 AIAA Joint Propulsion Conference, July 10-12, 2017 in Atlanta, GA. Paper #2017-4974.
- Lundgreen, R.K., Hossain, M.A., Prenter, R., Bons, J.P., Gregory, J.W., and Ameri, A., 2017, “Impingement Heat Transfer Characteristics of a Sweeping Jet,” presented at AIAA SciTech Conference, Jan 9-13, 2017, Grapevine, TX, paper #AIAA-2017-1535.
- Hossain, M.A., Prenter, R., Lundgreen, R., Agricola, L., Ameri, A., Gregory, J.W., and Bons, J.P., 2017, “Investigation of Crossflow Interaction of an Oscillating Jet,” presented at AIAA SciTech Conference, Jan 9-13, 2017, Grapevine, TX, paper #AIAA-2017-1690.
- Hossain, M.A., Prenter, R., Agricola, L., Lundgreen, R., Ameri, A., Gregory, J.W., and Bons, J.P., 2017, “Effects of Roughness on Performance of Fluidic Oscillators,” presented at AIAA SciTech Conference, Jan 9-13, 2017, Grapevine, TX, paper #AIAA-2017-0770.
2015
Conference Papers
- Prenter, R., Ameri, A., and Bons, J.P., 2015, “Measurement and Prediction of Hot Streak Profiles Generated by Axially Opposed Dilution Jets,” presented at the 2015 AIAA SciTech conference in Kissimmee, FL, January 5-9, 2015. Paper #AIAA-2015-0304.
2023
Journal Publications
- •McFadden, E.J., Brandt, P.J., and Bons, J.P., "Swept-Wing Active Flow Control with a Streamwise Row of Vortex Generating Jets, " AIAAJ, Vol. 61, No. 3 (2023), pp. 1142-1150.
DOI: 10.2514/1.J062302 -
Spens, A., Pisano, A.P., and Bons, J.P., “Leading-Edge Active Flow Control Enabled by Curved Fluidic Oscillators,” AIAAJ, Vol. 61, No. 4 (2023), pp. 1675-1686.
DOI: 10.2514/1.J062329 / researchgate.net
Conference Papers
-
Brandt, P.J., McFadden, E.J., and Bons, J.P., 2023, “Flow Field Characterization for Swept Wing Active Separation Control”, presented at the 2023 AIAA Aviation Conference, June 12 – 16, 2023, in San Diego, CA. Paper #: AIAA 2023-3285
DOI: 10.2514/6.2023-3285 -
Brandt, P.J. and Bons, J.P., 2023, “Computational Analysis of Swept Wing Dynamic Response to Step Increases in Angle of Attack”, presented at the 2023 AIAA Aviation Conference, June 12 – 16, 2023, in San Diego, CA. Paper #: AIAA 2023-4002DOI: 10.2514/6.2023-4002
-
Brandt, P.J. and Bons, J.P., 2023, “Computational Simulation of Swept Wing Dynamic Response to Active Flow Control via Vortex Generating Jets”, presented at the 2023 AIAA Aviation Conference, June 12 – 16, 2023, in San Diego, CA. Paper #: AIAA 2023-4309
DOI: 10.2514/6.2023-4309 - Spens, A., and Bons, J.P., 2023, “Active Fluidic Control Of A Nozzle Guide Vane Throat”, submitted for presentation at IGTI 2023 in Boston, Massachusetts, Jun 26-30, 2023. Paper #: GT2023-101856.
- Spens, A., McFadden, E., and Bons, J.P., 2023, “Active Flow Control of a Swept Wing using Unsteady Fluidic Fence Techniques”, presented at AIAA SciTech 2023 in National Harbor, Maryland, Jan 23-27, 2023. Paper #: AIAA 2023-1238
DOI: 10.2514/6.2023-1238 - Rambacher, C. and Bons, J.P., 2023, “Effect of Reynolds Number on Swept-Wing Active Flow Control with Streamwise Vortex Generating Jets”, presented at AIAA SciTech 2023 in National Harbor, Maryland, Jan 23-27, 2023. Paper #: AIAA 2023-1239
DOI: 10.2514/6.2023-1239
2022
Conference Papers
- Spens, A. and Bons, J.P., 2022, “Swept-Wing Flow Control with a Spanwise Row of Leading-Edge Fluidic Oscillators,” presented at the 2022 AIAA Aviation Conference, June 27 – July 1, 2022, in Chicago, IL.
DOI: 10.2514/6.2022-3466 / researchgate.net - McFadden, E.J., Brandt, P.J., and Bons, J.P., 2022, “The Effect of Spanwise Location of a VGJ Fluidic Fence on Swept Wing Performance,” presented at the 2022 AIAA Aviation Conference, June 27 – July 1, 2022, in Chicago, IL.
DOI: 10.2514/6.2022-3468 - Rambacher, C.B. and Bons, J.P., 2022, “Experimental Investigation of the Effect of Wind Tunnel Wall Distance on Swept Wings in Compressible Flow”, presented at the 2022 AIAA Aviation Conference, June 27 – July 1, 2022, in Chicago, IL.
DOI: 10.2514/6.2022-3559 - Brandt, P.J., McFadden, E.J., and Bons, J.P., 2022, “Dynamic Response of Swept Wing Aerodynamics to Active Flow Control through Vortex Generating Jets,” presented at the 2022 AIAA Aviation Conference, June 27 – July 1, 2022, in Chicago, IL.
DOI: 10.2514/6.2022-3888 - Spens, A., Brandt, P.J., and Bons, J.P., 2022, “Characterization of Out-of-Plane Curved Fluidic Oscillators,” presented at AIAA SciTech 2022 in San Diego, CA, Jan 3-7, 2022. Paper #: AIAA-2022-2424.
DOI: 10.2514/6.2022-2424 / researchgate.net - Spens, A., Pisano, A.P., and Bons, J.P., 2022, “The Application of Curved Fluidic Oscillators for Leading Edge Flow Control,” presented at AIAA SciTech 2022 in San Diego, CA, Jan 3-7, 2022. Paper #: AIAA-2022-2425.
DOI: 10.2514/6.2022-2425 / researchgate.net - McFadden, E.J., Brandt, P.J., and Bons, J.P., 2022, “Swept Wing Active Flow Control Using a Streamwise Row of Vortex Generating Jets,” presented at AIAA SciTech 2022 in San Diego, CA, Jan 3-7, 2022. Paper #: AIAA-2022-1546.
DOI: 10.2514/6.2022-1546
2020
Journal Publications
- Benton, S., and Bons,J.P., 2020, “Crow and Elliptic Instabilities in a Streamwise Vortex-Wall Interaction,” AIAA Journal Technical Note, Dec 2020
DOI: 10.2514/1.J059849
2019
Conference Papers
- Hussain, A. and Bons, J.P., 2019, “The Effect of Active Boundary Layer Fence Spanwise Location on Swept Wing Performance,” presented at AIAA Aviation 2019 in Dallas, TX, June 17-21, 2019. Paper #: AIAA-2019-3684.
2018
Journal Publications
- Bons, J.P., Benton, S., Bernardini, C., and Bloxham, M., 2018, “Active Flow Control For Low Pressure Turbines,” AIAA Journal, Vol. 56, No. 7, pp. 2687-2698. https://doi.org/10.2514/1.J056697
- Walker, M.M., Hipp, K.D., Benton, S.I., and Bons, J.P., 2018, “Effect of Jet Spacing on Swept Wing Leading Edge Separation Control”, Technical Note in AIAA Journal. (Vol. 56, No. 7), pp. 2907-2910 https://doi.org/10.2514/1.J056352
- Walker, M., and Bons, J.P., 2018, “The Effect of Passive and Active Boundary Layer Fences on Swept Wing Performance at Low Reynolds Number,” presented at AIAA SciTech 2018 in Kissimmee, FL, Jan 8-12, 2018. Paper #: AIAA-2018-0793.
2017
Journal Publications
- Hipp, K.D., Walker, M.M., Benton, S.I., and Bons, J.P., 2017, “Control of Poststall Airfoil Using Leading-Edge Pulsed Jets," AIAA Journal , Vol. 55, pp. 365-376, (12 pages) doi: 10.2514/1.J055223.
Conference Papers
- Bons, J.P., Frankhouser, M.W., and Gregory, J.W., 2017, “Synchronized Flow Control of Dynamic Stall under Coupled Pitch and Freestream Oscillations,” to be presented at the 73rd Annual Forum of the American Helicopter Society, May 9-11, 2017, Fort Worth, Texas, paper #199.
2016
Journal Publications
- Memory, C.L., Chen, J.P., and Bons, J.P., 2016, “Implicit Large Eddy Simulation of a Stalled Low Pressure Turbine Airfoil”, ASME Journal of Turbomachinery, July 2016, Vol 138(7):071008, 10 pages.
- Bernardini, C., Benton, S.I., Hipp, K., and Bons, J.P., 2016, “Large Low-Frequency Oscillations Initiated by Flow Control on a Post-Stall Airfoil”, AIAA Journal, Jan 2016, DOI: 10.2514/1.J054321 (12 pages).
Conference Papers
- Walker, M.M., Hipp, K.D., and Bons, J.P., 2016, “The Role of Spanwise Flow in Swept Wing Separation Control with Varied Spanwise Jet Spacing”, presented at the AIAA Aviation Tech Conference, June13-17, 2016, in Washington D.C., paper #AIAA-2016-3120.
- Sacco, C., Hossain, M.A., and Bons, J.P., 2016, “The Effects of Freestream Turbulence on Steady VGJ Flow Control on a Highly Loaded Transonic LPT Cascade”, presented at the AIAA Aviation Tech Conference, June13-17, 2016, in Washington D.C., paper #AIAA-2016-4089.
- Naigle, S.C., Frankhouser, M., Gregory, J.W., and Bons, J.P., 2016, “Effects of Time-Varying Flow Velocity on Steady Blowing Flow Control for a Pitching Airfoil,” presented at the 72nd Annual Forum of the American Helicopter Society, May 17-19, 2016, West Palm Beach, Florida, paper #208.
- Lorber, P.F., Bowles, P.O., Berezin, C.R., Scott, M.W., Hird, K., Frankhouser, M., Bons, J.P., and Gregory, J.W., 2016, “Compressible Dynamic Stall Alleviation Through High Momentum Steady Blowing,” presented at the 72nd Annual Forum of the American Helicopter Society, May 17-19, 2016, West Palm Beach, Florida, paper #132.
- Naigle, S.C., Frankhouser, M.W., Williams, K.A., Gregory, J.W., and Bons, J.P., 2016, “Experimental Modeling of Compressible Dynamic Stall in Unsteady Flow through Interpolation of Phase-Matched Conditions in Steady Flow”, presented at the AHS Technical Meeting on Aeromechanics Design for Vertical Lift, San Francisco, California, January 20-22, 2016.
- Benton, S.I., and Bons, J.P., 2016, “Response of a Streamwise Vortex-Wall Interaction to Unsteady Forcing”, presented at the 2016 AIAA SciTech conference in San Diego, CA, January 4-8, 2016. Paper #AIAA-2016-1605.
- Hipp, K.D., Walker, M.M., Benton, S.I., and Bons, J.P., 2016, “Control of Leading-Edge Airfoil Stall Using Pulsed Jets” presented at the 2016 AIAA SciTech conference in San Diego, CA, January 4-8, 2016. Paper #AIAA-2016-1822.
2015
Conference Papers
- Bernardini, C., Sacco, C., Bons, J.P., Chen, J-P, Martelli, F., 2015, “The Role of Three-Dimensional Interactions in Fluidic Control of Shock-Induced Separation on a Transonic Turbine Blade”, presented at the ASME Turbo Expo 2015 in Montreal Canada, June 15-19, 2015. Paper #GT2015-43395.
- Memory, C.L., Chen, J.P., and Bons, J.P., 2015, “Implicit Large Eddy Simulation of a Stalled Low Pressure Turbine Airfoil”, presented at the ASME Turbo Expo 2015 in Montreal Canada, June 15-19, 2015. Paper #GT2015-43792.
- Walker, M. M., Hipp, K.D., Benton, S.I., and Bons, J.P., 2016,“Effect of Spanwise Jet Spacing on Separation Control for Swept and Unswept Airfoils”, presented at 2015 AIAA Applied Aerodynamics Conference in Dallas, TX, June 22-26, 2015. Paper #AIAA 2015-2425.
- Naigle, S.C., Frankhouser, M.W., Hird, K., Gregory, J.W., and Bons, J.P., 2015, “Blowing Flow Control of Dynamic Stall under Coupled Pitch and Freestream Oscillations”, presented at the 71st Annual Forum of the American Helicopter Society, May 5-7, 2015, Virginia Beach, Virginia, paper #125.
- Hipp, K., Benton, S., Walker, M., and Bons, J.P., 2015, “Parametric Optimization of Control for a Post-Stall Airfoil Using Pulsed Jets,” presented at the 2015 AIAA SciTech conference in Kissimmee, FL, January 5-9, 2015. Paper #AIAA-2015-1268.
- Benton, S., and Bons, J.P., 2015, “Control of a Model Secondary Flow Targeting Convective Instabilities,” presented at the 2015 AIAA SciTech conference in Kissimmee, FL, January 5-9, 2015. Paper #AIAA-2015-1055.
2014
Journal Publications
- Bernardini, C., Benton, S.I., Lee, J.D., Bons, J.P., Chen, J-P, and Martelli, F., 2014, “Steady VGJ Flow Control on a Highly Loaded Transonic LPT Cascade: Effects of Compressibility and Roughness”, ASME Journal of Turbomachinery, Nov. 2014, Vol. 136., 111003 (11 pages). doi: 10.1115/1.402814.
- Benton, S.I., Bernardini, C., Bons, J.P., and Sondergaard, R., 2014, “Parametric Optimization of Unsteady Endwall Blowing on a Highly Loaded LPT,” ASME Journal of Turbomachinery, July 2014, Vol. 136., 071013 (8 pages). doi: 10.1115/1.4026127
- Bernardini, C., Benton, S.I., Chen, J-P, and Bons J.P., 2014, “Exploitation of Subharmonics for Separated Shear Layer Control on a High-Lift LPT Using Acoustic Forcing,” ASME Journal of Turbomachinery, May 2014, Vol. 136., 051018 (9 pages). doi: 10.1115/1.4025586.
- Bloxham, M.J. and Bons, J.P., 2014, “A Global Approach to Turbomachinery Flow Control: Passage Vortex Control,” ASME Journal of Turbomachinery, April 2014, Vol. 136., 041003 (9 pages). doi: 10.1115/1.4024686.
- Bernardini, C., Benton, S.I., Chen, J-P, and Bons J.P., 2014, “Pulsed Jets Laminar Separation Control Using Instability Exploitation”. AIAA Journal, Volume 52, Issue 1, pp. 104-115, doi: http://arc.aiaa.org/doi/abs/10.2514/1.J052274
Conference Papers
- Steurer, A., Benton, S.I., and Bons, J.P., 2014, “Effect of Endwall Boundary Layer Thickness on Unsteady Wake Loss Generation in a Highly Loaded LPT Cascade”, presented at the ASME Turbo Expo 2014 in Dusseldorf, Germany, June 16-20, 2014. Paper #GT2014-26921.
- Bernardini, C., Benton, S.I., Lee, J.D., Bons, J.P., Chen, J-P, and Martelli, F., 2014, “Steady VGJ Flow Control on a Highly Loaded Transonic LPT Cascade: Effects of Compressibility and Roughness”, presented at the ASME Turbo Expo 2014 in Dusseldorf, Germany, June 16-20, 2014. Paper #GT2014-27177.
- Bernardini, C., Benton, S.I., Hipp, K., and Bons, J.P., 2014, “Large Low-Frequency Oscillations Initiated by Sub-Optimal Flow Control on a Post-Stall Airfoil”, presented at 2014 AIAA Applied Aerodynamics Conference in Atlanta, GA, June 16-20, 2014. Paper #AIAA 2014-2978.
- Bernardini, C., Benton, S., and Bons, J.P., 2014, “Understanding Leading Edge Stall Physics by Acoustic Excitation,” presented at 2014 AIAA SciTech ASM conference in National Harbor, Maryland, January 13-17, 2014. Paper #AIAA 2014-1125.
- Benton, S. and Bons, J.P., 2014, “Three-dimensional Instabilities in Vortex/Wall Interactions: Linear Stability and Flow Control,” presented at 2014 AIAA SciTech ASM conference in National Harbor, Maryland, January 13-17, 2014. Paper #AIAA 2014-1267.
2013
Journal Publications
- Bernardini, C., Benton, S.I., and Bons, J.P., 2013, “The Effect of Acoustic Excitation on Boundary Layer Separation of a Highly Loaded LPT Blade”, ASME Journal of Turbomachinery, September 2013, Vol. 135., 051001 (9 pages). doi: 10.1115/1.4007834.
- Packard, N.O., Thake, M.P. Jr., Bonilla, C.H., Gompertz, K., and Bons, J.P.,2013, “Active Control of Flow Separation of a Laminar Airfoil,” AIAA Journal, Vol. 51, (5), Mar 2013, pp. 1032-1041.
Conference Papers
- Bernardini, C., Benton, S.I., Chen, J-P, and Bons J.P., 2013, “Exploitation of Subharmonics for Separated Shear Layer Control on a High-Lift LPT Using Acoustic Forcing,” presented at the ASME Turbo Expo 2013 in San Antonio, Texas, June 3-7, 2013. Paper #GT2013-95995.
- Benton, S.I., Bernardini, C., Bons, J.P., and Sondergaard, R., 2013, “Parametric Optimization of Unsteady Endwall Blowing on a Highly Loaded LPT,” presented at the ASME Turbo Expo 2013 in San Antonio, Texas, June 3-7, 2013. Paper #GT2013-95113.
- Bernardini, C., Benton, S. I., Bons, J. P., 2013, “Separation Control by Acoustic Excitation on a Highly Loaded Low Pressure Turbine Blades,” presented at the 10th European Turbomachinery Conference, Lappeenranta, Finland. April, 2013.
- Benton, S.I., Bernardini, C., and Bons, J.P., 2013, “Control of Three-Dimensional Flow Instabilities at the Side-Wall Junction of an Airfoil Cascade,” presented at 2013 AIAA FD conference in San Diego, CA. Paper # AIAA 2013-3162
- Bernardini, C., Benton, S., Chen, J-P, and Bons, J.P., 2013, “Investigation of Pulsed Blowing Control Mechanism Using Wavelet Analysis and Acoustic Excitation,” presented at AIAA Aerospace Sciences Meeting in Grapevine, TX, Jan 7-10, 2013. Paper #AIAA-2013-0850.
2022
Journal Publications
- Zhu, W., Bons, J.P., and Gregory, J.W., 2022, “Boundary Layer and Near Wake Measurements of a Two-Dimensional Airfoil with Background-Oriented Schlieren Method,” Experiments in Fluids, published on-line 28 Dec 2022, 64:7.
DOI: 10.1007/s00348-022-03550-2 - Goss, A.E., Bons, J.P., and Burton, G., 2022, “An Arbitrary Lagrange-Eulerian Investigation of HRAM Shallow Jet Pre-Spurt Formation and Time Sensitivities to Impact Plate Dynamics”, Journal of Impact Engineering.
DOI: 10.1016/j.ijimpeng.2022.104275
2021
Journal Publications
- Boyle, R.J., Gnanaselvam, P., Parikh, A.H., Ameri, A.A., Bons, J.P., and Nagpal, V.K., 2021, “Design Of Stress Constrained Sic/Sic Ceramic Matrix Composite Turbine Blades,” ASME Journal of Engineering for Gas Turbines and Power, May 2021, 143(5).
DOI: 10.1115/1.4049776
2020
Journal Publications
- Zhu, W, McCrink, MH, Bons, JP, and Gregory, JW, 2020, “The unsteady Kutta condition on an airfoil in a surging flow,” Journal of Fluid Mechanics, vol. 893, no. R2, June 25, 2020. Published online April 15, 2020.
DOI: 10.1017/jfm.2020.254 / researchgate.net
Conference Papers
- Boyle, R.J., Gnanaselvam, P., Parikh, A.H., Ameri, A.A., Bons, J.P., and Nagpal, V.K., 2020, “Design Of Stress Constrained Sic/Sic Ceramic Matrix Composite Turbine Blades,” presented (virtually) at the IGTI 2020 in London, England (GT2020-15067).
DOI: 10.1115/GT2020-15067 - Zhu, W., McCrink, M., Bons, J.P., and Gregory, J.W., 2020, “Aerodynamic Performance and Trailing Edge Flow Physics on an Airfoil in an Oscillating Freestream,” presented at AIAA SciTech 2020 in Orlando, FL, January 6-10, 2020. Paper #: AIAA-2020-1758.
DOI: 10.2514/6.2020-1758
2019
Conference Papers
- Banks, W.V., Ameri, A.A., Boyle, R.J., and Bons, J.P., 2019, “A Comparison of Tip Gap Loss Sensitivity for Shrouded vs. Unshrouded Turbine Rotors,” presented at the IGTI 2019 in Phoenix, AZ, June 2019 (GT2019-91747).
- Zhu, W., Bons, J.P., Gregory, J.W., 2019, “Reynolds Scaling Effects on Dynamic Stall of VR-7 and VR-12 Airfoils,” presented at AIAA SciTech 2019 in San Diego, CA, Jan 7-11, 2019. Paper #: AIAA-2019-0304.
2018
Conference Papers
- Banks, W.V., Ameri, A.A., Bons, J.P., and Boyle, R.J., 2018, “Aerodynamic Analysis of Shrouded High Pressure Turbine Rotor Blades,” presented at the July 2018 AIAA Propulsion and Energy Forum, Cincinnati, OH. Paper #: AIAA-2018-4437.
- Zhu, W., Harter, B., Bons, J.P., & Gregory, J.W., 2018, “Characterizing Wave Propagation in an Unsteady Transonic Wind Tunnel,” presented at the AIAA Aviation Forum, June, 2018.
2016
Journal Publications
- Turner, M., Roberts, R., Rumpfkeil, M., VanKuren, J., Bons, J., Smith, T., Ausserer, J., and Litke, P., 2016, “Thrust Vectoring Design Project at Six Universities”, International Journal of Engineering Education, Vol. 32, No. 1(A), pp. 252-271.
Conference Papers
- Roberts CJ, Mahmoud AM, Bons J, Hossain A, Elsheikh A, Vinciguerra R, Vinciguerra P, Ambrósio R., 2016, “A New Stiffness Parameter in Air Puff Induced Corneal Deformation Analysis”. Invest Ophth Vis Sci. 2016; 57: ARVO (Association for Research in Vision and Ophthalmology) E-Abstract 2390.
2015
Conference Papers
- Hird, K., Frankhouser, M.W., Naigle, S.C., Gregory, J.W., and Bons, J.P., 2015,“Study of an SSC-A09 Airfoil in Compressible Dynamic Stall with Freestream Mach Oscillations”, presented at the 71st Annual Forum of the American Helicopter Society, May 5-7, 2015, Virginia Beach, Virginia, paper #311.
2014
Conference Papers
- Hird, K., Frankhouser, M.W., Gregory, J.W., and Bons, J.P., 2014, “Compressible Dynamic Stall of an SSC-A09 Airfoil Subjected to Coupled Pitch and Freestream Mach Oscillations”, presented at the 70th Annual Forum of the American Helicopter Society, May 20-22, 2014, Montreal, Quebec, Canada, paper #424.
2013
Conference Papers
- Turner, M., Bons, J., Roberts, R., Rumpfkeil, M., Smith, T., VanKuren, J., Ausserer, J., and Litke, P., 2013, “Thrust Vectoring Design Project at Six Universities (Part I): Project Description and Final Designs”, presented at the ASME Turbo Expo 2013 in San Antonio, Texas, June 3-7, 2013. Paper #GT2013-95602.
- Rumpfkeil, M., Bons, J., Roberts, R., Smith, T., Turner, M., VanKuren, J., and Ausserer, J., 2013, “Thrust Vectoring Design Project at Six Universities (Part II): Impact on Student Learning and Lessons Learned”, presented at the ASME Turbo Expo 2013 in San Antonio, Texas, June 3-7, 2013. Paper #GT2013-95631.