You are here

Blaine Lilly

  • Associate Professor, Mechanical & Aerospace Engr
  • 201 W 19th Ave
    W488 Scott Lab
    Columbus, OH 43210
  • 614-292-2297

Honors

  • 20170101-20190101

    Associate Chair for Undergraduate Education.

  • 20180101

    Marion Smith Alumni Service Award.

  • 20140101

    Fellow.

  • 20130101

    Boyer Award for Excellence in Teaching Innovation.

  • 20090101

    Welliver Fellow.

  • 20060101

    Alumni Award for Distinguished Teaching.

  • 20030101

    Michael Moran Award for Teaching Excellence.

  • 20030101

    Boyer Award for Excellence in Teaching Innovation.

  • 20030101

    MacQuigg Student Award for Outstanding Teaching.

Journal Articles

2014

  • Vienny Nguyen*,V; Lilly,Blaine; Castro,Carlos, 2014, "The exoskeletal structure and tensile loading behavior of an ant neck joint." Journal of Biomechanics 47, no. 2, 497-504 - 497-504.

2008

  • Gill, C.; Lilly, B.; Lilly, B., 2008, "Bridging design disciplines: preparing students for unpredictable challenges." Journal of Design Research 7, no. 3, 220-237 - 220-237.

2007

  • Castro,Carlos,E; Rios,Mauricio,Cabrera; Castro,Jose,M; Lilly,Blaine, 2007, "Multiple criteria optimization with variability considerations in injection molding." Polymer Engineering and Science 47, no. 4, 400-409 - 400-409.

2006

  • Carpenter, B.; Patil, S.; Hoffman, R.; Lilly, B. et al., 2006, "Effect of machine compliance on mold deflection during injection and packing of thermoplastic parts." Polymer Engineering and Science 46, no. 7, 844-852 - 844-852.

2005

  • Kinsella, M.E.; Lilly, B.; Gardner, B.E.; Jacobs, N.J., 2005, "Experimental determination of friction coefficients between thermoplastics and rapid tooled injection mold materials." Rapid Prototyping Journal 11, no. 3, 167-173 - 167-173.
  • Castro, C.E., Cabrera Rios, M., Lilly, B., Castro, J.M., 2005, Simultaneous Optimization of Mold Design and Processing Conditions in Injection Molding. Journal of Polymer Engineering 25, no. 6, 459-486 - 459-486.

2004

  • Bhagavatula, N.; Michalski, D.; Lilly, B.; Glozer, G., 2004, "Modelling and verification of ejection forces in thermoplastic injection moulding." Modelling and Simulation in Materials Science and Engineering 12, no. 3,
  • Yen,Y,C; Sohner,J; Lilly,B; Altan,T, 2004, "Estimation of tool wear in orthogonal cutting using the finite element analysis." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 146, no. 1, 82-91 - 82-91.

2003

  • Bonifas, A.; Lilly, B., 2003, "Design of an electrochemical cell for micromachining applications." Journal of Integrated Design and Process Science 7, no. 1, 1-23 - 1-23.
  • Kuswanti, C.; Xu, G.; Qiao, J.; Stuart, J.A. et al., 2003, "An engineering approach to plastic recycling based on rheological characterization." Journal of Industrial Ecology 6, no. 3-4, 125-135 - 125-135.
  • Castro, C.E., Cabrera Rios, M., Lilly, B., Castro, J.M., Mount-Campbell, C.A., 2003, Identifying the best compromises between multiple performance measures in injection molding using data envelopment analysis. Journal of Integrated Design and Process Science 7, no. 1, 77-86 - 77-86.

2002

  • Xu,G,J; Qiao,J,H; Kuswanti,C; Koelling,K; Stuart,J,A; Lilly,B, 2002, "Characterization of virgin and postconsumer blended high-impact polystyrene resins for injection molding." JOURNAL OF APPLIED POLYMER SCIENCE 84, no. 1, 1-8 - 1-8.

2000

  • Xu,G,J; Qiao,J,H; Kuswanti,C; Simenz,M; Koelling,K; Stuart,J,A; Lilly,B, 2000, "Insights into reuse of high impact polystyrene from post-consumer electronics equipment housings." PROCEEDINGS OF THE 2000 IEEE INTERNATIONAL SYMPOSIUM ON ELECTRONICS AND THE ENVIRONMENT *, 348-353 - 348-353.
  • Shim, S.; Lilly, B.W.; Parnianpour, M.; Mayo, N. et al., 2000, "Ergonomic evaluation of three load bearing handles with different profiles using pressure sensitive film." Biomedical Engineering - Applications, Basis and Communications 12, no. 3, 155-167 - 155-167.

1999

  • Lilly, B.W.; Brevick, J.R.; Shi, Q., 1999, "Pulsed ECM: Effect of process parameters on surface finish and mechanical fatigue life of H-13 tool steel." Technical Paper - Society of Manufacturing Engineers. MR no. MR99-137, 1-6 - 1-6.

Presentations

  • "Optimization and Analysis of Variability in Injection Molding.”." Presented at Society of Plastics Engineers Annual Technical Conference,

Papers in Proceedings

2015

  • Gill, C.; Lilly, B.; Reeder, P. "Problem framing and design opportunities." (1 2015).

2013

  • V Nguyen, B Lilly, CE Castro Reverse engineering the structure and function of the Allegheny mount and neck (insecta, hymenoptera, formica, exsectoides). in ASME IMECE. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1750436, (1 2013).
  • Lilly, B.W.; Abrams, L.M.; Neal, M.; Srinivasan, K. et al. "DEVELOPING AN EFFECTIVE PLATFORM FOR INTRODUCING MECHANICAL ENGINEERING IN A LARGE PUBLIC UNIVERSITY." in ASME International Mechanical Engineering Congress and Exposition. (1 2013).
  • Nguyen, V.N.; Lilly, B.W.; Castro, C.E. "REVERSE ENGINEERING THE STRUCTURE AND FUNCTION OF THE ALLEGHENY MOUND ANT NECK (INSECTA, HYMENOPTERA, FORMICA, EXSECTOIDES)." in ASME International Mechanical Engineering Congress and Exposition. (1 2013).
  • Nguyen, V.N.; Lilly, B.W.; Castro, C.E.; ASME, "REVERSE ENGINEERING THE STRUCTURE AND FUNCTION OF THE ALLEGHENY MOUND ANT NECK (INSECTA, HYMENOPTERA, FORMICA, EXSECTOIDES)." (1 2013).
  • Lilly, B.W.; Abrams, L.M.; Neal, M.; Srinivasan, K. et al. "DEVELOPING AN EFFECTIVE PLATFORM FOR INTRODUCING MECHANICAL ENGINEERING IN A LARGE PUBLIC UNIVERSITY." (1 2013).

2012

  • Abrams, L.; Altschuld, J.W.; Lilly, B.W.; Mendelsohn, D.A. "AC 2012-5238: INTRODUCTION TO MECHANICAL ENGINEERING: A COURSE IN PROGRESS." in ASEE Annual Conference. (1 2012).
  • Abrams, L.; Altschuld, J.W.; Lilly, B.W.; Mendelsohn, D.A. "Introduction to Mechanical Engineering: A course in progress." (8 2012).
  • Lilly, B.W.; Abrams, L.M.; Neal, M.; Srinivasan, K. et al. "Developing an effective platform for introducing mechanical engineering in a large public university." (12 2012).
  • Abrams, L.; Altschuld, J.W.; Lilly, B.W.; Mendelsohn, D.A. et al. "AC 2012-5238: INTRODUCTION TO MECHANICAL ENGINEERING: A COURSE IN PROGRESS." (1 2012).
  • Abrams, L.; Altschuld, J.W.; Lilly, B.W.; Mendelsohn, D.A. "Introduction to Mechanical Engineering: A course in progress." (1 2012).
  • Nguyen, V.N.; Lilly, B.W.; Castro, C.E. "Reverse engineering the structure and function of the allegheny mound ant neck (insecta, hymenoptera, formica, exsectoides)." (12 2012).

2011

  • Scudieri, P.; Lilly, B. "A constraint-based model of the design process." (12 2011).

2007

  • Lilly, B.; Gill, C. "Integrating design and engineering, I: Functional abstraction and product architecture." (12 2007).
  • Gill, C.; Lilly, B. "Integrating design and engineering, II: Product architecture and product design." (12 2007).

2006

  • Gill, C.L.; Lilly, B.W.; Forsgren, R.C. "A DIFFICULT CASE: BRINGING PRODUCT DESIGN METHODS TO NASA ENGINEERS." in 9th International Design Conference. (1 2006).
  • Gill, C.L.; Lilly, B.W.; Forsgren, R.C. "A difficult case: Bringing product design methods to NASA engineers." (12 2006).
  • Gill, C.L.; Lilly, B.W.; Forsgren, R.C.; Engineering, F.O.M. "A DIFFICULT CASE: BRINGING PRODUCT DESIGN METHODS TO NASA ENGINEERS." (1 2006).
  • Gill,C,L; Lilly,B,W; Forsgren,R,C "A DIFFICULT CASE: BRINGING PRODUCT DESIGN METHODS TO NASA ENGINEERS." in 9th International Design Conference. (1 2006).
  • Lilly, B.W.; Gill, C. "The challenge of sustainability: Designing for resilience." (12 2006).

2005

  • Castro, C.E.; Lilly, B.; Castro, J.M.; Ríos, M.C. "Optimization and analysis of variability in high precision injection molding." (12 2005).

2004

  • Castro, C.E.; Ríos, M.C.; Lilly, B.; Castro, J.M. "Selection of process and design variable settings under multiple performance measures in injection molding." (6 2004).
  • Forsgren, R.; Lilly, B. "NASA engineering training lessons learned: The course development process from the top and bottom." (12 2004).

2003

  • Shi, Q.; Brevick, J.R.; Lilly, B.W. "Thermal fatigue prediction in die casting shot sleeves." (12 2003).
  • Merrill, J.; Lilly, B.; Masud, O. "A curriculum collaboration model: Working with upper division students to inprove a first-year program." (12 2003).
  • Lilly, B.; Merrill, J.; Masud, O.; Brand, S. et al. "A curriculum collaboration model: Working with upper division students to improve a first-year program." (12 2003).
  • Merrill, J.; Lilly, B.; Masud, O. "A curriculum collaboration model: Working with upper division students to inprove a first-year program." (1 2003).
  • Castro, C.; Bhagavatula, N.; Cabrera-Ríos, M.; Lilly, B. et al. "Identifying the best compromises between multiple performance measures in injection molding (IM) using data envelopment analysis (DEA): Preliminary results." (1 2003).
  • Shi, Q.; Brevick, J.R.; Lilly, B.W.; SME, "Thermal fatigue prediction in die casting shot sleeves." (1 2003).
  • Shi, Q.; Brevick, J.R.; Lilly, B.W. "Thermal fatigue prediction in die casting shot sleeves." in 31st North American Manufacturing Research Conference (NAMRC). (1 2003).
  • Jantharawong, A.; Cabrera-Ríos, M.; Lilly, B.; Castro, J.M. "Evaluation of variability in injection molding (IM) molds." (1 2003).

2001

  • Kinzel, G.; Lilly, B.; Luscher, A.; Piper, J. et al. "Instructional modules to support senior capstone design classes." (12 2001).