You are here

Taylan Altan

  • Retiree-Faculty Emeritus, Integrated Systems Engineering
  • Faculty Emeritus, Integrated Systems Engineering
  • 1971 Neil Avenue
    339 Baker Systems
    Columbus, OH 43210
  • 614-292-5063

Journal Articles

2019

  • Fallahiarezoodar, A.; Gupta, T.; Goertemiller, C.; Altan, T., 2019, "Residual stresses and springback reduction in U-channel drawing of Al5182-O by using a servo press and a servo hydraulic cushion." Production Engineering

2018

  • Behrens, B.A.; Diaz-Infante, D.; Altan, T.; Yilkiran, D. et al., 2018, "Improving Hole Expansion Ratio by Parameter Adjustment in Abrasive Water Jet Operations for DP800." SAE International Journal of Materials and Manufacturing 11, no. 3,

2017

  • Levy, S.A.; Baker, C.; Rogers, R.W.; Anderson, W.A. et al., 2017, "METAL FORMING, INTERRELATION BETWEEN THEORY AND PRACTICE.."

2008

  • Kaya, S.; Altan, T.; Groche, P.; Klöpsch, C., 2008, "Determination of the flow stress of magnesium AZ31-O sheet at elevated temperatures using the hydraulic bulge test." International Journal of Machine Tools and Manufacture 48, no. 5, 550-557 - 550-557.

2004

  • Altan, T., 2004, "Whither sheet hydroforming." Automotive Industries AI 184, no. 3,

2003

  • Altan, T., 2003, "Virtual machihing shortens tool-development lead time." Cutting Tool Engineering 55, no. 9, 26 - 26.

1999

  • Rodríguez, C.A.; Harnau, T.; Wang, Y.; Akgerman, N. et al., 1999, "Estimation of machining time in high speed milling of prismatic parts." Technical Paper - Society of Manufacturing Engineers. MS no. MS99-142,

1998

  • Altan, T.; Ahmetoglu, M., 1998, "Industry oriented education and training in Net Shape Manufacturing." Technical Paper - Society of Manufacturing Engineers. AD no. 330, 1-6 - 1-6.
  • Özel, T.; Lucchi, M.; Rodríguez, C.A.; Altan, T., 1998, "Prediction of chip formation and cutting forces in flat end milling: Comparison of process simulations with experiments." Technical Paper - Society of Manufacturing Engineers. AD no. 250, 1-6 - 1-6.
  • Ahmetoglu, M.; Altan, T., 1998, "Hydroforming of tubes and shells." Technical Paper - Society of Manufacturing Engineers. MF 98, no. 285,

1997

  • Altan, T.; Fallböhmer, P., 1997, "High-speed milling with PKB tools." Werkstatt und Betrieb 130, no. 6, 416-419 - 416-419.
  • Altan, T.; Fallboehmer, P.; Kumar, S., 1997, "Computer simulation of orthogonal metal cutting process: Determination of material properties and effects of tool geometry on chip flow." Technical Paper - Society of Manufacturing Engineers. MR 97, no. 177,

1996

  • Ceretti, E.; Fallböhmer, P.; Wu, W.T.; Altan, T., 1996, "Application of 2D FEM to chip formation in orthogonal cutting." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 169-180 - 169-180.
  • Vazquez, V.; Sweeney, K.; Wallace, D.; Wolff, C. et al., 1996, "Tooling and process design to cold forge a cross groove inner race for a constant velocity joint - Physical modeling and FEM process simulation." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 144-157 - 144-157.
  • Muderrisoglu, A.; Murata, M.; Ahmetoglu, M.A.; Kinzel, G. et al., 1996, "Bending, flanging, and hemming of aluminum sheet-an experimental study." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 10-17 - 10-17.
  • Altan, T.; Vazquez, V., 1996, "Numerical Process Simulation for Tool and Process Design in Bulk Metal Forming." CIRP Annals - Manufacturing Technology 45, no. 2, 599-615 - 599-615.
  • Koç, M.; Vazquez, V.; Witulski, T.; Altan, T., 1996, "Application of the finite element method to predict material flow and defects in the semi-solid forging of A356 aluminum alloys." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 106-112 - 106-112.
  • Shulkin, L.; Jansen, S.W.; Ahmetoglu, M.A.; Kinzel, G.L. et al., 1996, "Elastic deflections of the blank holder in deep drawing of sheet metal." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 34-40 - 34-40.
  • Altan, T., 1996, "Manufacturing education and research in U.S. and Germany - What can we learn from each other?." Technical Paper - Society of Manufacturing Engineers. AD no. 235,
  • Kim, H.; Altan, T., 1996, "Cold forging of steel - Practical examples of computerized part and process design." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 122-131 - 122-131.
  • Ahmetoglu, M.; Altan, T., 1996, "Stamping and hydroforming of aluminum alloys." Technical Paper - Society of Manufacturing Engineers. MF 96, no. 292,
  • Liu, J.; Westhoff, B.; Ahmetoglu, M.A.; Altan, T., 1996, "Application of viscous pressure forming (VPF) to low volume stamping of difficult-to-form alloys - Results of preliminary FEM simulations." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 49-58 - 49-58.
  • Kim, H.; Lee, S.M.; Altan, T., 1996, "Prediction of hardness distribution in cold backward extruded cups." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 113-121 - 113-121.
  • Taupin, E.; Breitling, J.; Wu, W.T.; Altan, T., 1996, "Material fracture and burr formation in blanking results of FEM simulations and comparison with experiments." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 68-78 - 68-78.
  • Duggal, N.; Ahmetoglu, M.A.; Kinzel, G.L.; Altan, T., 1996, "Computer aided simulation of cold roll forming - A computer program for simple section profiles." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 41-48 - 41-48.
  • O'Connell, M.; Painter, B.; Maul, G.; Altan, T., 1996, "Flashless closed-die upset forging-load estimation for optimal cold header selection." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 81-94 - 81-94.
  • Breitling, J.; Wallace, D.; Altan, T., 1996, "Investigations of different loading conditions in a high speed mechanical press." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 18-23 - 18-23.
  • Esche, S.K.; Khamitkar, S.; Kinzel, G.L.; Altan, T., 1996, "Process and die design for multi-step forming of round parts from sheet metal." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 24-33 - 24-33.
  • Heislitz, F.; Livatyali, H.; Ahmetoglu, M.A.; Kinzel, G.L. et al., 1996, "Simulation of roll forming process with the 3-D FEM code PAM-STAMP." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 59-67 - 59-67.
  • Painter, B.; Shivpuri, R.; Altan, T., 1996, "Prediction of die wear during hot-extrusion of engine valves." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 132-143 - 132-143.
  • Takemasu, T.; Vazquez, V.; Painter, B.; Altan, T., 1996, "Investigation of metal flow and preform optimization in flashless forging of a connecting rod." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 95-105 - 95-105.
  • Fallböhmer, P.; Altan, T.; Tönshoff, H.K.; Nakagawa, T., 1996, "Survey of the die and mold manufacturing industry - Practices in Germany, Japan, and the United States -." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 158-168 - 158-168.
  • Schünemann, M.; Ahmetoglu, M.A.; Altan, T., 1996, "Prediction of process conditions in drawing and ironing of cans." Journal of Materials Processing Technology 59, no. 1-2 SPEC. ISS., 1-9 - 1-9.

1995

  • Lange, K.; Knoerr, M.; Altan, T., 1995, "Fatigue analysis concept to avoid failure of forging tooling." Wire 45, no. 3, 164-168 - 164-168.
  • Ahmetoglu, M.; Broek, T.R.; Kinzel, G.; Altan, T., 1995, "Control of Blank Holder Force to Eliminate Wrinkling and Fracture in Deep-Drawing Rectangular Parts." CIRP Annals - Manufacturing Technology 44, no. 1, 247-250 - 247-250.

1994

  • Altan, T., 1994, "Preface." Journal of Materials Processing Tech. 46, no. 1-2,
  • Wu, W.T.; Li, G.J.; Tang, J.P.; Altan, T., 1994, "Finite Element Analysis of Three-Dimensional Metal Flow in Cold and Hot Forming Processes." CIRP Annals - Manufacturing Technology 43, no. 1, 235-239 - 235-239.

1993

  • Shen, G.; Shivpuri, R.; Semiatin, S.L.; Lee, J.Y. et al., 1993, "Investigation of Microstructure and Thermomechanical History in the Hammer Forging of an Incoloy 901 Disk." CIRP Annals - Manufacturing Technology 42, no. 1, 343-346 - 343-346.
  • Ghobrial, M.I.; Lee, J.Y.; Altan, T.; Bay, N. et al., 1993, "Factors Affecting the Double Cup Extrusion Test for Evaluation of Friction in Cold and Warm Forging." CIRP Annals - Manufacturing Technology 42, no. 1, 347-351 - 347-351.

1992

  • Altan, T., 1992, "Preface." Journal of Materials Processing Tech. 33, no. 1-2,
  • Shivpuri, R.; Momin, S.; Altan, T., 1992, "Computer-Aided Design of Dies to Control Dimensional Quality of Extruded Shapes." CIRP Annals - Manufacturing Technology 41, no. 1, 275-279 - 275-279.
  • Altan, T., 1992, "Preface." Journal of Materials Processing Tech. 35, no. 3-4,

1990

  • Altan, T.; Miller, R.A., 1990, "Design for Forming and other Near Net Shape Manufacturing Processes." CIRP Annals - Manufacturing Technology 39, no. 2, 609-620 - 609-620.
  • Burte, P.R.; Im, Y.T.; Altan, T.; Semiatin, S.L., 1990, "Measurement and analysis of heat transfer and friction during hot forging." TRANS. ASME J. ENGINEERING FOR INDUSTRY 112, no. 4 Nov., 332-339 - 332-339.

1988

  • Shivpuri, R.; Raghupathi, P.S.; Altan, T., 1988, "Characteristics of forming presses and recent developments for precision and net shape forming." Journal of Materials Shaping Technology 5, no. 4, 259-267 - 259-267.
  • Sitaraman, S.K.; Kinzel, G.L.; Altan, T., 1988, "Finite-difference method for rigid-plastic analysis of sheet metal stretching.." IN: COMPUTER-AIDED DESIGN AND MANUFACTURE OF DIES AND MOLDS, PRESENTED AT ASME WINTER ANNUAL MEETING, (CHICAGO, U.S.A.: NOV. 32 ), 167-183 - 167-183.
  • Lilly, B.W.; Bailey, R.W.; Altan, T., 1988, "Automated finishing of dies and molds: a state of the art review.." IN: COMPUTER-AIDED DESIGN AND MANUFACTURE OF DIES AND MOLDS, PRESENTED AT ASME WINTER ANNUAL MEETING, (CHICAGO, U.S.A.: NOV. 32 ), 75-90 - 75-90.
  • Tang, J.; Oh, S.I.; Altan, T.; Miller, R.A., 1988, "A knowledge based approach to automate forging design." Journal of Materials Shaping Technology 6, no. 1, 7-17 - 7-17.
  • Im, Y.T.; Vardan, O.; Shen, G.; Altan, T., 1988, "Investigation of Metal Flow in Non-Isothermal Forging Using Ring and Spike Tests." CIRP Annals - Manufacturing Technology 37, no. 1, 225-230 - 225-230.

1987

  • Semiatin, S.L.; Collings, E.W.; Wood, V.E.; Altan, T., 1987, "Determination of the interface heat transfer coefficient for non-isothermal bulk-forming processes." Journal of Manufacturing Science and Engineering, Transactions of the ASME 109, no. 1, 49-57 - 49-57.
  • Altan, T., 1987, "Design and Manufacture of Dies and Molds." CIRP Annals - Manufacturing Technology 36, no. 2, 455-462 - 455-462.
  • Park, J.J.; Oh, S.I.; Altan, T., 1987, "Analyses of axisymmetric sheet forming processes by rigid-viscoplastic finite element method." Journal of Manufacturing Science and Engineering, Transactions of the ASME 109, no. 4, 347-354 - 347-354.

1986

  • Sevenler, K.; Raghupathi, P.S.; Altan, T., 1986, "SPREAD AND BULGING IN BAR AND ROD ROLLING USING FLAT ROLLS.." Iron and Steel Engineer 63, no. 3, 57-62 - 57-62.

1984

  • Ficke, J.A.; Oh, S.I.; Altan, T., 1984, "Use of Electronic Geometry Transfer and FEM Simulation in the Design of Hot Forming Dies for a Gear Blank." CIRP Annals - Manufacturing Technology 33, no. 1, 123-127 - 123-127.
  • Gunasekera, J.S.; Gegel, H.L.; Doraivelu, S.M.; Malas, J.C. et al., 1984, "Computer Aided Design of "Multi-Holed", Streamlined Extrusion Dies." CIRP Annals - Manufacturing Technology 33, no. 1, 129-131 - 129-131.

1983

  • Kennedy, K.F.; Altan, T.; Lahoti, G.D., 1983, "COMPUTER-AIDED ANALYSIS OF METAL FLOW STRESSES AND ROLL PASS DESIGN IN ROD ROLLING.." Iron and Steel Engineer 62, no. 6, 50-54 - 50-54.
  • Oh, S.I.; Park, J.J.; Kobayashi, S.; Altan, T., 1983, "APPLICATION OF FEM MODELING TO SIMULATE METAL FLOW IN FORGING A TITANIUM ALLOY ENGINE DISK.." Journal of engineering for industry 105, no. 4, 251-258 - 251-258.
  • Oh, S.I.; Park, J.J.; Kobayashi, S.; Altan, T., 1983, "Application of FEM modeling to simulate metal flow in forging a titanium alloy engine disk." Journal of Manufacturing Science and Engineering, Transactions of the ASME 105, no. 4, 251-258 - 251-258.

1982

  • Gunasekera, J.S.; Gegel, H.L.; Malas, J.C.; Doraivelu, S.M. et al., 1982, "Computer-Aided Process Modelling of Hot Forging and Extrusion of Aluminum Alloys." CIRP Annals - Manufacturing Technology 31, no. 1, 131-135 - 131-135.
  • Altan, T., 1982, "Computer aided design and manufacturing (CAD/CAM) of hot forging dies." Journal of Applied Metalworking 2, no. 2, 77-85 - 77-85.
  • Sabroff, A.M.; Douglas, J.R.; Badawy, A.; Altan, T. et al., 1982, "Application of CAD/CAM Techniques to Close Tolerance Forging of Spiral Bevel Gears." CIRP Annals - Manufacturing Technology 31, no. 1, 141-144 - 141-144.
  • Altan, T.; Lahoti, G.D.; Oh, S.I., 1982, "ALPID - A GENERAL PURPOSE FEM PROGRAM FOR METAL FORMING.." Technical Paper - Society of Manufacturing Engineers. MS

1981

  • Altan, T.; Semiatin, S.L.; Lahoti, G.D.; Altan, T., 1981, "Determination of Flow Stress Data for Practical Metal Forming Analysis." CIRP Annals - Manufacturing Technology 30, no. 1, 129-134 - 129-134.

1980

  • Duncan, J.L.; Altan, T., 1980, "New Directions in Sheet Metal Forming Research." CIRP Annals - Manufacturing Technology 29, no. 1, 153-156 - 153-156.
  • Subramanian, T.L.; Altan, T., 1980, "A practical method for estimating forging loads with the use of a programmable calculator." Journal of Applied Metalworking 1, no. 2, 60-68 - 60-68.
  • Altan, T., 1980, "CAD/CAM OF DIES FOR METAL PROCESSING APPLICATIONS.." Manufacturing Engineering Transactions 17-25 - 17-25.
  • Subramanian, T.L.; Lahoti, G.D.; Akgerman, N.; Altan, T., 1980, "COMPUTER AIDED SIMULATION AND OPTIMIZATION OF TANDEM CUP IRONING PROCESS.." Manufacturing Engineering Transactions 161-116 - 161-116.
  • My, L.X.; Lahoti, G.D.; Black, J.T.; Altan, T., 1980, "DEVELOPMENT AND EVALUATION OF AN INTERACTIVE GRAPHICS PROGRAM FOR PLATE ROLLING.." Manufacturing Engineering Transactions 192-119 - 192-119.

1979

  • Altan, T.; Lahoti, G.D., 1979, "LIMITATIONS, APPLICABILITY AND USEFULNESS OF DIFFERENT METHODS IN ANALYZING FORMING PROBLEMS.." CIRP Annals - Manufacturing Technology 28, no. 2, 473-485 - 473-485.
  • Nagpal, V.; Billhardt, C.F.; Altan, T., 1979, "Lubricated extrusion of “T„ sections from aluminum, titanium and steel using computer-aided techniques." Journal of Manufacturing Science and Engineering, Transactions of the ASME 101, no. 3, 319-325 - 319-325.
  • Subramanian, T.L.; Akgerman, N.; Altan, T., 1979, "APPLICATION OF INTERACTIVE GRAPHICS IN CAD/CAM FOR SOME METAL FORMING PROCESSES AND TOOLING.." IEE Conference Publication 57-69 - 57-69.
  • Altan, T.; Billhardt, C.F.; Nagpal, V., 1979, "Computerized Design and Manufacture of Extrusion Dies for Aluminium and Titanium.." Aluminium Dusseldorf 55, no. 12, 783-785 - 783-785.
  • Lahoti, G.D.; Liuzzi, L.; Altan, T., 1979, "COMPUTER-AIDED ANALYSIS OF STRESSES, LOADS, METAL FLOW AND TEMPERATURES IN RADIAL FORGING OF TUBES.." Proceedings of The Japan Congress on Materials Research 381-396 - 381-396.

1978

  • Lahoti, G.D.; Nagpal, V.; Altan, T., 1978, "Selection of lubricants in hotforgingand extrusion.."
  • Lahoti, G.D.; Shah, S.N.; Altan, T., 1978, "COMPUTER AIDED ANALYSIS OF THE DEFORMATIONS AND TEMPERATURE IN STRIP ROLLING.." J Eng Ind Trans ASME 100, no. 2, 159-166 - 159-166.
  • Lahoti, G.D.; Subramanian, T.L.; Altan, T., 1978, "COMPUTER-AIDED PREDICTION OF METAL FLOW, TEMPERATURES AND FORMING LOAD IN SELECTED METAL-FORMING PROCESSES.." American Society of Mechanical Engineers, Applied Mechanics Division, AMD 28, 183-195 - 183-195.
  • Lahoti, G.D.; Altan, T., 1978, "ANALYSIS OF METAL FLOW IN NOSING OF TUBULAR PRODUCTS.." 151-157 - 151-157.
  • Altan, T.; Lahoti, G.D.; Nagpal, V., 1978, "Systems approach in massive forming and application to modeling of forging processes." Journal of Applied Metalworking 1, no. 1, 29-40 - 29-40.
  • Subramanian, T.L.; Altan, T., 1978, "APPLICATION OF COMPUTER-AIDED TECHNIQUES TO PRECISION CLOSED-DIE FORGING.." Gen Assem of CIRP, 28th, Manuf Technol 27, no. 1, 123-127 - 123-127.
  • Leboti, G.D.; Nagpal, V.; Altan, T., 1978, "SELECTION OF LUBRICANTS IN HOT FORGING AND EXTRUSION.."

1977

  • Altan, T., 1977, "APPLICATION OF SPECIFIC-PURPOSE SOFTWARE FOR CAD/CAM OF DIES.." Mec Mater Electr no. 325, 30-38 - 30-38.
  • Nagpal, V.; Billhardt, C.F.; Altan, T.; Gagne, R., 1977, "AUTOMATED DESIGN OF EXTRUSION DIES BY COMPUTER.." Light Metal Age 35, no. 11-12, 16-18 - 16-18.
  • Altan, T.; Nagpal, V., 1977, "Impression and closed-die forging." International Metals Reviews 22, no. 1, 322-341 - 322-341.
  • Lahoti, G.D.; Altan, T., 1977, "COMPUTER-AIDED ANALYSIS OF METAL FLOW AND TEMPERATURES IN RADIAL FORGING OF TUBES.." 1,

1976

  • Nagpal, V.; Altan, T., 1976, "DESIGN AND MANUFACTURING OF DIES FOR LUBRICATED EXTRUSION OF SHAPES.." Technical Paper - Society of Manufacturing Engineers. MF
  • Lahoti, G.D.; Altan, T., 1976, "ANALYSIS OF THE RADIAL FORGING PROCESS FOR MANUFACTURING RODS AND TUBES.." J Eng Ind Trans ASME 98 Ser B, no. 1, 265-271 - 265-271.
  • Akgerman, N.; Altan, T., 1976, "Application of CAD/CAM in forging turbine and compressor blades." Journal of Engineering for Gas Turbines and Power 98, no. 2, 290-296 - 290-296.
  • Lahoti, G.D.; Altan, T., 1976, "DESIGN OF DIES FOR RADIAL FORGING OF RODS AND TUBES.." Technical Paper - Society of Manufacturing Engineers. MF
  • Nagpal, V.; Altan, T.; Gagne, R., 1976, "A simplified analysis of the lubricated shape-extrusion process.."

1975

  • Nagpal, V.; Altan, T., 1975, "ANALYSIS OF THE THREE-DIMENSIONAL METAL FLOW IN EXTRUSION OF SHAPES WITH THE USE OF DUAL STREAM FUNCTIONS.." 26-40 - 26-40.
  • Akgerman, N.; Altan, T., 1975, "APPLICATION OF CAD/CAM IN FORGING TURBINE AND COMPRESSOR BLADES.." American Society of Mechanical Engineers (Paper) no. 75 -GT-42,
  • Akgerman, N.; Subramanian, T.L.; Altan, T., 1975, "CAD/CAM AS APPLIED TO CLOSED DIE FORGING.." SME Tech Pap MS75-516
  • Douglas, J.R.; Altan, T., 1975, "FLOW STRESS DETERMINATION FOR METALS AT FORGING RATES AND TEMPERATURES.." J Eng Ind Trans ASME 97 Ser B, no. 1, 66-76 - 66-76.
  • Lahoti, G.D.; Gordon, P.F.; Altan, T., 1975, "OPTIMUM DIE PROFILE FOR DRAWING OF SHELLS AND CUPS.." 143-148 - 143-148.
  • Lahoti, G.D.; Altan, T., 1975, "INPUT/OUTPUT RELATIONSHIPS IN METAL FORMING.."
  • Lahoti, G.D.; Altan, T., 1975, "PREDICTION OF TEMPERATURE DISTRIBUTIONS IN AXISYMMETRIC COMPRESSION AND TORSION.." Journal of Engineering Materials and Technology, Transactions of the ASME 97 Ser H, no. 2, 113-120 - 113-120.

1974

  • Subramanian, T.L.; Akgerman, N.; Altan, T., 1974, "COMPUTER APPLICATIONS IN THE DESIGN AND MANUFACTURING OF DIES FOR METALWORKING.." SME Tech Pap no. MF74-180 Apr 29-May 3 974,
  • Brass, O.; Altan, T., 1974, "SELECTION OF EQUIPMENT FOR PRECISION FORGING OF TURBINE AND COMPRESSOR BLADES.." SME Tech Pap no. MF74-603 May 21-23 974,
  • Altan, T.; Akgerman, D.N., 1974, "Computer-Aided Design and Manufacture of Forging Dies for Rough-and Finish-Forging.." Ind-Anz 96, no. 34, 763-767 - 763-767.
  • Lahoti, G.D.; Altan, T., 1974, "PREDICTION OF TEMPERATURE DISTRIBUTIONS IN TUBE EXTRUSION USING A VELOCITY FIELD WITHOUT DISCONTINUITIES.." 209-224 - 209-224.

1973

  • Akgerman, N.; Altan, T., 1973, "New Computer Applications in Forging.." Ind-Anz 95, no. 83, 1905-1908 - 1905-1908.
  • Akgerman, N.; Altan, T., 1973, "COMPUTER AIDED DESIGN AND MANUFACTURING (CAD/CAM) OF FORGING DIES FOR STRUCTURAL PARTS.." 165-183 - 165-183.
  • Altan, T.; Boulger, F.W., 1973, "FLOW STRESS OF METALS AND ITS APPLICATION IN METAL FORMING ANALYSES.." ASME Pap no. 73 -Prod-4,
  • Douglas, J.R.; Altan, T., 1973, "FLOW STRESS DETERMINATION FOR METALS AT FORGING RATES AND TEMPERATURES.." American Society of Mechanical Engineers (Paper) no. 73 -WA/Prod-13,
  • Altan, T.; Lee, C.H.; Akgerman, N., 1973, "APPROXIMATE CALCULATION OF VELOCITY AND TEMPERATURE DISTRIBUTIONS IN AXISYMMETRIC EXTRUSION AND DRAWING.." 107-127 - 107-127.
  • Akgerman, N.; Becker, J.R.; Altan, T., 1973, "PREFORM DESIGN IN CLOSED-DIE FORGING.." Metall Met Form 40, no. 5, 135-138 - 135-138.

1972

  • Altan, T.; Nichols, D.E., 1972, "USE OF STANDARDIZED COPPER CYLINDERS FOR DETERMINING LOAD AND ENERGY IN FORGING EQUIPMENT.." J Eng Ind Trans ASME 94 Ser B, no. 3, 769-774 - 769-774.
  • Akgerman, N.; Altan, T., 1972, "MODULAR ANALYSIS OF GEOMETRY AND STRESSES IN CLOSED-DIE FORGING: APPLICATION TO A STRUCTURAL PART.." J Eng Ind Trans ASME 94 Ser B, no. 4, 1025-1034 - 1025-1034.

1971

  • Altan, T.; Fiorentino, R.J., 1971, "Prediction of loads and stresses in closed-die forging." Journal of Manufacturing Science and Engineering, Transactions of the ASME 93, no. 2, 477-484 - 477-484.

1970

  • Akgerman, N.; Lahoti, G.D.; Altan, T., 1970, "Computer-aided roll pass design in rolling of airfoil shapes." Journal of Applied Metalworking 1, no. 3, 30-40 - 30-40.
  • ALTAN, T.; HENNING, H.J.; SABROFF, A.M., 1970, "USE OF MODEL MATERIALS IN PREDICTING FORMING LOADS IN METALWORKING." J Eng Ind Trans ASME 92 Ser B, no. 2, 444-452 - 444-452.
  • Altan, T.; Avitzur, B.; Schey, J.A., 1970, "Discussion." Journal of Tribology 92, no. 3, 396-397 - 396-397.

1968

  • Altan, T.; Kobayashi, S.; DePierre, V.; Pierce, C.M., 1968, "Plastic deformation of copper and steel in hot extrusion through conical dies." Journal of Manufacturing Science and Engineering, Transactions of the ASME 90, no. 2, 371-380 - 371-380.
  • Altan, T.; Kobayashi, S., 1968, "A numerical method for estimating the temperature distributions in extrusion through conical dies." Journal of Manufacturing Science and Engineering, Transactions of the ASME 90, no. 1, 167-118 - 167-118.

Papers in Proceedings

2019

  • Diaz-Infante, D.; Narayanan, A.; Altan, T. "Estimation of cutting parameters in two-stage piercing to reduce edge strain hardening." (4 2019).

2018

  • Fallahiarezoodar, A.; Goertemiller, C.; Katre, A.; Altan, T. "Effect of E-Modulus Variation on Springbackand a Practical Solution." (1 2018).
  • Üstünyagiz, E.; Altan, T. "Design of progressive die sequence by considering the effect of friction, temperature and contact pressure." (1 2018).
  • Fallahiarezoodar, A.; Goertemiller, C.; Groseclose, A.; Altan, T. "Determination of variable E-modulus through wipe bending test: Application to springback prediction." (9 2018).
  • Konzack, S.; Radonjic, R.; Liewald, M.; Altan, T. "Prediction and reduction of springback in 3D hat shape forming of AHSS." (1 2018).

2017

  • Stemler, P.; Samant, A.; Hofmann, D.; Altan, T. "Impact of Servo Press Motion on Hole Flanging of High Strength Steels." (3 2017).

2015

  • Fallahiarezoodar, A.; Ju, L.; Altan, T. "Use of FE simulation and servo press capabilities in forming of AHSS and aluminum alloys." (1 2015).

2013

  • Billur, E.; Porzner, H.; Dooge, D.; Altan, T. et al. "Materials optimization - Manufacturing assembly and CAE & structure - Concurrent engineering with hot and cold formed tailored solutions." (1 2013).

2012

  • Kardes Sever, N.; Mete, O.H.; Demiralp, Y.; Choi, C. et al. "Springback prediction in bending of AHSS-DP 780." (11 2012).

2011

  • Kim, H.; Kimchi, M.; Kardes, N.; Altan, T. "Effects of variable elastic modulus on springback predictions in stamping advanced high-strength steels (AHSS)." (12 2011).

2008

  • Braedel, M.; Palaniswamy, H.; Golle, M.; Hoffmann, H. et al. "Investigation of die tryout using programmable multipoint cushion system for stamping large automotive body panels." (1 2008).
  • Faass, I.; Palaniswamy, H.; Hoffmann, H.; Altan, T. et al. "Effect of spacers on the material flow for process control in automotive stamping." (1 2008).
  • Russell, W.C.; Al-Zkeri, I.; Altan, T. "Wire die stress modeling." (1 2008).

2006

  • Hwang, Y.M.; Lin, Y.K.; Altan, T. "Determination of flow stresses of aluminum tubes by hydraulic bulge tests." (9 2006).

2005

  • Altan, T.; Aue-U-lan, Y.; Palaniswamy, H.; Kaya, S. "State of the art, visions & priorities in research & development on metal forming." (1 2005).
  • Altan, T.; Palaniswamy, H.; Yadav, A. "Recent R&D and applications in sheet & tube hydroforming." (12 2005).

2004

  • Ngaile, G.; Gariety, M.; Altan, T. "Enhancing tribological conditions in tube hydroforming by using textured tubes." (12 2004).

1992

  • Yu, T.T.; Chen, Y.M.; Miller, R.A.; Kinzel, G.L. et al. "Framework for sheet metal part design and manufacturing assessment." (12 1992).
  • Yu, T.T.; Chen, Y.M.; Miller, R.A.; Kinzel, G.L. et al. "Framework for sheet metal part design and manufacturing assessment." (12 1992).

1990

  • Wu, W.T.; Oh, S.I.; Altan, T.; Miller, R.A. "Automated Mesh Generation for forming simulation. I." (12 1990).
  • Yossifon, S.; Messerly, D.; Kropp, E.; Altan, T. et al. "Investigation of a servo motor driven multi-action press for application in sheet metal forming." (12 1990).

1988

  • Burte, P.R.; Im, Y.T.; Altan, T.; Semiatin, S.L. "Measurement and analysis of heat transfer and friction during hot forging." (12 1988).
  • Sitaraman, S.K.; Kinzel, G.L.; Altan, T. "Finite-difference method for rigid-plastic analysis of sheet metal stretching." (12 1988).
  • Lilly, B.W.; Bailey, R.W.; Altan, T. "Automated finishing of dies and molds: a state of the art review." (12 1988).
  • Im, Y.T.; Altan, T. "Heat generation and transfer in metal forming: Recent developments." (12 1988).

1987

  • Altan, T. "ENGINEERING RESEARCH CENTER FOR NET SHAPE MANUFACTURING AND COOPERATION WITH SDCE.." (12 1987).

1986

  • Sevenler, K.; Raghupathi, P.S.; Altan, T.; Miller, R.A. "RULE-BASED SYSTEM FOR FORMING SEQUENCE DESIGN FOR MULTISTAGE COLD FORGING.." (12 1986).
  • Sevenier, K.; Reghupathi, P.S.; Altan, T.; Miller, R.A. "KNOWLEDGE-BASED SYSTEMS APPROACH TO FORMING SEQUENCE DESIGN FOR COLD FORGING.." (12 1986).

1985

  • Tang, J.P.; Oh, S.I.; Altan, T. "APPLICATION OF EXPERT SYSTEMS TO AUTOMATIC FORGING DESIGN.." (12 1985).

1984

  • Kuhlmann, D.J.; Raghupathi, P.S.; Altan, T.; Ostberg, D. "COMPUTER AIDED DESIGN (CAD) OF FORGING AND EXTRUSION DIES FOR THE PRODUCTION OF GEARS BY FORMING.." (12 1984).
  • Wu, W.T.; Oh, S.I.; Altan, T. "INVESTIGATION OF DEFECT FORMATION IN RIB-WEB TYPE FORGING BY 'ALPID'.." (12 1984).
  • Badawy, A.A.; Raghupathi, P.S.; Kuhlmann, D.J.; Altan, T. "COMPUTER-AIDED DESIGN OF MULTISTAGE FORGING OPERATIONS FOR ROUND PARTS.." (1 1984).

1983

  • Oh, S.I.; Badawy, A.; Altan, T. "COMPUTER SIMULATION OF METAL FLOW IN WARM FORGING.." (1 1983).
  • Raghupathi, P.S.; Karima, M.; Akgerman, N.; Altan, T. "SIMPLIFIED APPROACH TO CALCULATE SPRINGBACK IN BRAKE BENDING.." (12 1983).
  • Lahoti, G.D.; Oh, S.I.; Altan, T. "STATE-OF-THE-ART IN MODELING OF MASSIVE FORMING PROCESSES.." (12 1983).
  • Badawy, A.; Oh, S.I.; Altan, T. "REMESHING TECHNIQUE FOR THE FEM SIMULATION OF METAL FORMING PROCESSES.." (12 1983).

1982

  • Oh, S.I.; Lahoti, G.D.; Altan, T. "APPLICATION OF FEM TO INDUSTRIAL METAL FORMING PROCESSES.." (12 1982).
  • Lahoti, G.D.; Semiatin, S.L.; Oh, S.E.; Altan, T. et al. "DEVELOPMENT OF PROCESS MODELS TO PRODUCE A DUAL-PROPERTY TITANIUM ALLOY COMPRESSOR DISK.." (12 1982).
  • Subramanian, T.L.; Nagpal, V.; Altan, T. "COMPUTER-AIDED MODELING OF SELECTED SHEET METAL FORMING PROCESS.." (1 1982).

1981

  • Oh, S.I.; Lahoti, G.D.; Altan, T. "ALPID - A GENERAL PURPOSE FEM PROGRAM FOR METAL FORMING.." (12 1981).
  • Cohen, P.H.; Lahoti, G.D.; Altan, T. "COMPUTER-AIDED ANALYSIS AND EXPERIMENTAL EVALUATION OF A ROLL-PASS SCHEDULE FOR ROLLING OF ROUND BARS.." (12 1981).

1978

  • Leboti, G.D.; Nagpal, V.; Altan, T. "SELECTION OF LUBRICANTS IN HOT FORGING AND EXTRUSION.." (1 1978).

1977

  • Lahoti, G.D.; Shah, S.N.; Altan, T. "COMPUTER-AIDED ANALYSIS OF THE DEFORMATIONS AND TEMPERATURES IN STRIP ROLLING.." (1 1977).
  • Nagpal, V.; Lahoti, G.D.; Altan, T. "NUMERICAL METHOD FOR SIMULTANEOUS PREDICTION OF METAL FLOW AND TEMPERATURES IN UPSET FORGING OF RINGS.." (1 1977).

1975

  • Akgerman, N.; Subramanian, T.L.; Altan, T. "CAD/CAM AS APPLIED TO CLOSED DIE FORGING.." (1 1975).
  • Lahoti, G.D.; Altan, T. "INPUT/OUTPUT RELATIONSHIPS IN METAL FORMING.." (1 1975).
  • Lahoti, G.D.; Altan, T. "ANALYSIS OF THE RADIAL FORGING PROCESS FOR MANUFACTURING RODS AND TUBES.." (1 1975).
  • Akgerman, N.; Altan, T. "APPLICATION OF CAD/CAM IN FORGING TURBINE AND COMPRESSOR BLADES.." (1 1975).

1974

  • Lahoti, G.D.; Altan, T. "PREDICTION OF TEMPERATURE DISTRIBUTIONS IN AXISYMMETRIC COMPRESSION AND TORSION.." (1 1974).

1973

  • Altan, T.; Boulger, F.W. "FLOW STRESS OF METALS AND ITS APPLICATION IN METAL FORMING ANALYSES.." (1 1973).
  • Douglas, J.R.; Altan, T. "FLOW STRESS DETERMINATION FOR METALS AT FORGING RATES AND TEMPERATURES.." (1 1973).